KOLSOL ELM327 Bluetooth OBD2 Scanner V1.5 ELM327 with Switch modified for Ford CH340+25K80 chip HS-CAN / MS-CAN.
How to install ScanMaster software for ELM327 Bluetooth scanner?
Software installation is the same as ELM327 USB.
Don’t need to install driver, but require to pair Bluetooth connection.
Operating system: IOS ,Windows XP, Windows 7, Android, Symbian.
Supported Software:
Torque-pro
Dashcmd
OBDScope Symbian
ScanMaster-ELM
scantool_net113
Forscan
FOCCCUS
Functions:
1.Read diagnostic trouble codes,both generic and manufacturer-specific,and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL.
3.Display current sensor data,including:
v Engine RPM
v Calculated Load Value
v Coolant Temperature
v Fuel System Status
v Vehicle Speed
v Short Term Fuel Trim
v Long Term Fuel Trim
v Intake Manifold Pressure
v Timing Advance
v Intake Air Temperature
v Air Flow Rate
v Absolute Throttle Position
v Oxygen sensor voltages/associated short term fuel trims
v Fuel System status
v Fuel Pressure
Many others…
Step 1: Open the ScanMaster-ELMv2.1 folder in the Computer-DVD/CD-RW Drive.
Step 2: Double-click the ScanMaster-ELM_2.1.104.771 icon to start it.
Step 3: You will see the following picture and click [Next].
Step 4: Select the [I accept the agreement] option and click [Next] button.
Step 5: Select the target location for the installation software.
Step 6: Successful installation,there would be a shortcut on the desktop.
Step 7: Open the software, set the complete user information.
Step 8: Double-click the KeyGen-scanmaster-2.1 icon to get the registration keys.
Step 9: Enter the installation code and click[Generate Key] button.
Then enter the registration keys to complete the registration.
ELM327 Bluetooth Connection:
You should follow the steps shown in the pictures below:
Step 1: Click [Add a Device] button.
Step 2: Select the [ OBDII ] option for the next step.
Step 3: [Select a pairing option]-[Enter the device’s pairing code].
Step 4: Enter the pairing password 1234 or 0000.
Step 5: This device has been successfully added to your computer.
How to ScanMaster-ELM Software:
Open ScanMaster-ELM software and select the interface type: Blue Tooth;
Click on the [Search Devices] button to see the devices you have searched for;
Click the [Test] button to test.
Test successful.ELM device found.
Open the ScanMaster-ELM software,choose the language you need.
Notice: Software port settings and device manager detected ports, both must be consistent
Click the [Connect] button in the lower left corner to connect the device.
The software is running ,computer detected interface version V1.5
Read Trouble Codes
Read Live Data Grip
How to use FoCCCus Software:
Open the FoCCCus folder and you will see the FoCCCus icon.
Software port settings and device manager detected ports, both must be consistent.
Select the language and click the [Open] button.
These are what you’ll see when the software is running:
elm327scantool 